Search the materials library

2024-T3 aluminium alloy

A high-strength Al–Cu–Mg sheet alloy widely used in aircraft structures where fatigue performance and damage tolerance outweigh general corrosion and weldability limits.

2219-T851 aluminium alloy

A weldable, heat-treatable Al–Cu alloy used for cryogenic tanks, launch vehicles and high-temperature aerospace structures.

3003-H14 aluminium alloy

A non-heat-treatable Al–Mn sheet alloy valued for formability, corrosion resistance and economical fabrication in heat exchangers, packaging and general sheet products.

5083-H116/H321 marine aluminium

A non-heat-treatable Al–Mg–Mn alloy selected for welded marine structures, cryogenic vessels and transport equipment requiring strength and seawater corrosion resistance.

5083-H131 armour aluminium plate

A strain-hardened 5083 aluminium armour plate condition used for lightweight structural and ballistic protection systems.

6061 aluminium alloy

A versatile heat-treatable Al–Mg–Si alloy used for structural extrusions, machined parts and welded assemblies where moderate strength and corrosion resistance are required.

6082-T6 aluminium alloy

A medium-to-high-strength Al–Mg–Si–Mn structural alloy widely used in European transport, bridges, machined parts and welded fabrications.

7050-T7451 aluminium alloy

A high-strength, thick-section Al–Zn–Mg–Cu aerospace plate alloy developed for improved stress-corrosion resistance and through-thickness toughness relative to many 7075 products.

7075 aluminium alloy

Al 7075

A high-strength Al–Zn–Mg–Cu alloy used for aerospace and high-performance structures where specific strength is prioritized over weldability and general corrosion tolerance.

A356-T6 aluminium casting alloy

A widely used Al–Si–Mg casting alloy balancing castability, pressure tightness, corrosion resistance and precipitation-hardening response.

AlSi10Mg additive/casting alloy

AlSi10Mg

An Al–Si–Mg alloy widely used in laser powder bed fusion and casting because of good processability, low density and useful post-heat-treatment strength.

AlSi7Mg casting alloy

A hypoeutectic aluminium–silicon–magnesium casting family combining castability, low density and precipitation-hardening response.

Al–2Sc master alloy

An aluminium–scandium master alloy used to introduce scandium for grain refinement, recrystallization resistance and precipitation strengthening in advanced aluminium products.

Al–4Cu reference

A binary aluminium–copper reference composition used to study age-hardening phase evolution, solidification and the Al-rich side of the Al–Cu system.

C63000 nickel-aluminium bronze

A high-strength nickel-aluminium bronze for marine hardware, landing-gear bushings and wear components requiring corrosion, galling and cavitation resistance.

C10100 oxygen-free electronic copper

An ultra-high-purity oxygen-free copper used where electrical conductivity, vacuum compatibility and hydrogen-embrittlement resistance are critical.

C11000 electrolytic tough-pitch copper

The standard high-conductivity commercial copper for electrical conductors, busbars, heat exchangers and general fabricated copper products.

C17200 beryllium copper

A precipitation-hardenable copper–beryllium alloy combining high strength, conductivity, non-sparking behaviour and resistance to fatigue and relaxation.

C19400 copper–iron–phosphorus alloy

A precipitation-strengthened Cu–Fe–P alloy used for lead frames, electrical connectors and automotive terminals requiring a balance of conductivity and strength.

C260 cartridge brass

A 70/30 copper–zinc brass combining formability, corrosion resistance and attractive surface finish for deep-drawn and general fabricated products.

C70250 copper–nickel–silicon alloy

A high-strength Cu–Ni–Si connector alloy combining good electrical conductivity, spring performance and resistance to stress relaxation at elevated temperature.

C95400 aluminium bronze

A high-strength aluminium bronze used for wear, corrosion and load-bearing service in marine and industrial machinery.

CuAg0.1 high-conductivity copper–silver

A dilute copper–silver alloy retaining high conductivity while improving softening resistance and strength for traction, generator and high-temperature electrical conductors.

CuCrZr / C18150 copper alloy

CuCrZr

A precipitation-strengthened copper alloy used where high electrical and thermal conductivity must be retained with improved strength and softening resistance.